7*24小時服務熱線：
4006418588
7*24小時服務熱線：
4006418588
1 產品性能（ Product performance）
高效泥巖分散劑是一種強效型粘泥分散劑，具有很強的分散性和滲透性。對盾構泥巖滲透性強，能夠迅速分解剝離泥巖。也能夠有效解決石油鉆探和地質鉆探中遇到的黏泥、油泥裹鉆問題，具體方式原理為通過分解剝離作用，直接、快速地滲透到粘土膠層結構中，將粘土氧化分解，逐漸脫落剝離，隨水流出。
High efficiency mudstone dispersant is a kind of highly effective clay dispersant with strong dispersibility and permeability. It has strong permeability to shield mudstone and can quickly decompose and peel mudstone. Also can effectively solve the oil drilling and geological drilling encountered slime, mud wrapped drilling problem, the specific way principle is through decomposition stripping action, directly, quickly permeate into the clay layer structure, the clay oxidation decomposition, gradually off stripping, with water flow out.
2 產品用途（Product uses:）
高效泥巖分散劑適用于盾構隧道、鉆探勘探、電站和煉油廠等部門，解決由于隧道系統和循環管道系統中泥漿沉積，消除形成大量的泥漿凝膠沉積和堵塞。
Efficient mudstone dispersant is mainly suitable for shield tunneling, drilling and prospecting, power stations and oil refineries and other departments, due to the tunneling system and circulation pipeline system by mud mud deposition, the formation of a large number of mud gel deposition, blocking.
3 技術指標
4 方法和效果（Method and performance）
首先將高粘性土分散劑按照分散劑：水=1:1的比例在攪拌條件下配制成分散劑溶液，攪拌時間大于5min即可使用。其次，將配置好分散劑溶液分次注入已經結泥餅的土倉中，首次注入量為3t，然后每隔半小時轉動一次刀盤以利于分散劑和土體的充分混合。8h后每隔2h注入0.5t分散劑溶液，直至注完為止。24~48h后，開始慢慢推進，將土倉渣土慢慢排出即可。分散劑也可用于預防盾構刀盤和土壓力倉的結餅，使用方法為將分散劑配制成20%的溶液，然后在推進過程中連續注入土倉即可。
First of all, the dispersant of high cohesive soil was prepared according to the ratio of dispersant: water =1:1 under the condition of agitation, and the agitation time was more than 5min before use.Pour the dispersant solution into the soil chamber with mud cake in batches. The first injection volume is 3T, and then turn the knife plate every half an hour to facilitate the full mixing of dispersant and soil. After 8h, 0.5t dispersant solution was injected every 2h until the injection was finished.24~48h later, start to slowly advance, the soil bin slowly discharge can be.Dispersants can also be used to prevent cake formation in shield cutters and earth pressure chambers by compounding dispersants into a 20% solution and continuously injecting them into the earth chamber during propulsive.
